Friday, October 14, 2011

Pool Tile Cleaning Lake Havasu



PROTECT YOUR INVESTMENT WITH PROFESSIONAL POOL TILE CLEANING


First: We lower your pool water level a few inches below the pool tile line. Depending on the substrate, we either bead blast or soda blast the buildup off at the lowest pressure in the industry, 20 psi. Calcium build up only requires 20 psi to be removed. Anything more and you risk etching the pool tile glazing.




Second: Using our own pump and filter, we then remove the bead blasting or soda blasting media from the bottom of the pool.



Finally:Your pool tile looks as good as new, and the best part about using Surface Renewal Pool Tile Cleaning, your pool tiles haven't been etched!



Using the lowest pressure in the industry takes us a little longer to clean pool tile however, the end result is what matters. QUALITY and CARE is what you get with Surface Renewal Pool Tile Cleaning. OUR POOL TILE CLEANING TRACK RECORD IS FLAWLESS!



We don't use any harsh chemicals to clean pool tile, and you don't need clean your filter afterwards because we don't use the pressure washing method. Beware of the hype! This system plugs pool filters and raises your tds level in your pool water so the build up will return very fast!



WHY SURFACE RENEWAL?

Not every pool tile cleaner is created equal. Surface renewal pool tile cleaning is the only pool tile cleaner with equipment that operates at this low of pressure! We build our own pool tile cleaning equipment to operate at the lowest pressure possible. Standard sandblast equipment that is sold to pool tile cleaners requires a minimum of 50 P.S.I. to operate.




For more info visit us online at http://www.pooltilecleaningpro.com/ or call us immediately at 877-835-8763 and our professional staff will be happy to help you with any questions.

Pool Tile Cleaning Palm Springs

Pool Tile Cleaning in Palm Springs is a necessary evil. The fact that the ground water is so saturated with minerals and salt it is a pool owners worst nightmare. There is a solution, Surface Renewal Pool Tile Cleaning can remove all the hard water deposits from your pool tile, brick, stone and pebble finishes. We also offer a 4 year coating to all surfaces that will repel any type of buildup. For more information visit us online at www.PoolTileCleaningPro.com or call us at 1-877-835-8763 to speak with one of our friendly staff.

Clean and Seal Bricks With Bead Blasting

Over time the sprinklers, and dirt accumulate contaminates on the surface of brick walkways giving the illusion of an unmaintained property. Did you know that in just 2 short days you can have your property looking its absolute best, perhaps even better than brand new? Surface Renewal can restore that old faded brick walk way in the front of your house give a rich and deserving curb appeal. The first step Surface Renewal  does is to remove any calcified buildup with our bead blasting process. Bead Blasting is similar to sandblasting except the media used is different. Secondly, we high pressure wash any remaining dust and dirt from the surface. After 24 hours our highly trained personnel, will return to professionally apply the correct sealer to the surface of the bricks. 72 hours later, normal foot traffic can resume on the walk way. For a free at home estimate contact the friendly staff at Surface Renewal at 1-877-835-8763 or http://www.pooltilecleaningpro.com/