Pool Tile Cleaning San Clemente

Surface Renewal Pool Tile Cleaning specializes in removing calcium and scale from pool tile, brick, stone and more WITHOUT HAVING TO DRAIN YOUR POOL AND CAUSING DAMAGE. Our state of the art pool tile cleaning service will have no impact on your daily routine, in fact most jobs take less than four hours to complete.

It's a know fact that not all pool tiles are created equal. There are glass pool tiles, ceramic pool tiles and porcelain pool tiles. Cleaning pool tiles requires special equipment to remove scale and calcium from the surface without causing damage. The most common method is using a sandblasting method using glass beads. The glass beads are so small they can fit through the holes of you cotton shirt fabric.

Another way is to use a high pressure washer and injecting a media called "Keiserite." This method used 4000 P.S.I. water sprayed extremely close to the surface. When this method is used, YOU WILL NEED TO DRAIN YOUR POOL COMPLETELY to remove the highly saturated pool water. This method will use approximately 100 to 150 LBS of salt minerals. If left in your pool to dissolve, your TDS level will be so high the scale can return in as little as a week! So if this method is used, SURFACE RENEWAL POOL TILE CLEANING DOES NOT USE OR RECOMMEND THIS METHOD, you the home owner will be responsible for these hidden costs

• The Pool Tile Cleaning Service
• Refilling of the Pool
• The Start Up Chemicals
• The Filter Cleaning

Did you know, that using too much pressure while bead blasting pool tile is the leading cause of damage and most importantly, the main reason the calcium buildup returns!

For that very reason, Surface Renewal Pool Tile Cleaning stepped away from the main stream and decided to take a VERY DIFFERENT APPROACH. The sandblast pots that are available to pool tile cleaners "REQUIRE 50 P.S.I." to operate. 50 P.S.I. is way too much pressure to clean pool tile. To fill the void and have a sandblast pot capable of operating at the extremely LOW pressure level required to clean pool tile without etching, we designed and fabricate our own sandblast pot! That's right, WE ACTUALLY DESIGN AND BUILD OUR OWN POOL TILE CLEANING EQUIPMENT! Our pool tile cleaning equipment is capable of operating as low as 10 P.S.I. Not only does it operate at extremely low pressure, it is also capable of using different medias. The reason we required the need to use different medias is to clean the more delicate glass tiles.

Trust your pool to the PROFESSIONALS at Surface Renewal Pool Tile Cleaning.

Licensed Bonded and Insured

We design and build our own Patent Pending Pool Tile Cleaning Equipment

For all your Southern California Pool Tile Cleaning needs give us a call: 1-877-835-8763

or check us out on line at Pool Tile Cleaning San Clemente